Your cart is currently empty!
The new ECI 6 MKII is a powerful integrated amplifier equipped with 4 analogue inputs. The ECI 6 MKII offers 2 x 125 Watts and is based on the successful ECI 5 MK II. To enhance it, we have equipped the ECI 6 MKII with an even better power supply and a more sophisticated preamplifier module.
As a result we can offer you an extremely substantial and dynamic amplifier, capable of controlling a wide range of speakers on the market.
Analogue sources can be connected to one balanced (XLR) input and three single-ended (RCA) stereo inputs. With two preamplifier outputs, one balanced and one single ended, the ECI6-MKII is ready for future expansions
The input stage is built from discrete circuits running in class A with zero feedback. The output stage runs with moderate amounts of negative feedback, carefully balanced between good bass extension and control, a detailed open midrange and a warm detailed top.
|All measurements are made at 120V / 240V //50Hz / 60Hz|
|Clipping point of the preamplifier is set to a level where total harmonic distortion (THD) is 0.2%|
|Input Impedance (Fixed)||330 kohm|
|Output Impedance (20 Hz-20kHz)||< 0,009 Ohm|
|Frequency response (DC - 65 kHz)||- 0.4 dB|
|Input level for rated output||1 V RMS|
|Max. peak current||> 150 A|
|THD(measured at 1 kHzhalf power,8W)||< 0,001 %|
|THD (measured at 1 kHz -1 dB, 8 W)||< 0,0015 %|
(measured with bothinputsshorted)
|400 Hz - 30 kHz : 150 µV
DC - 30 kHz : 200 µV
|Damping factor (20 Hz - 20 kHz)||> 850|
|Rated output power|
|8 ohms||600 W|
|4 ohms||1200 W|
|Power consumption (no load or signal)||230 W|
|The NEMO is DC coupled from input to output|
|Width||465 mm / 18.3 inches|
|Depth||450 mm / 17.7 inches|
|Height||288 mm / 11.3 inches|
|Weight||41 kg. / 90.2 lbs.|