Your cart is currently empty!

The new ECI 6 MKII is a powerful integrated amplifier equipped with 4 analogue inputs. The ECI 6 MKII offers 2 x 125 Watts and is based on the successful ECI 5 MK II. To enhance it, we have equipped the ECI 6 MKII with an even better power supply and a more sophisticated preamplifier module.
As a result we can offer you an extremely substantial and dynamic amplifier, capable of controlling a wide range of speakers on the market.
Analogue sources can be connected to one balanced (XLR) input and three single-ended (RCA) stereo inputs. With two preamplifier outputs, one balanced and one single ended, the ECI6-MKII is ready for future expansions
The input stage is built from discrete circuits running in class A with zero feedback. The output stage runs with moderate amounts of negative feedback, carefully balanced between good bass extension and control, a detailed open midrange and a warm detailed top.
All measurements are made at 120V / 240V //50Hz / 60Hz | |
Amplifier section | |
Clipping point of the preamplifier is set to a level where total harmonic distortion (THD) is 0.2% | |
Input Impedance (Fixed) | 330 kohm |
Output Impedance (20 Hz-20kHz) | < 0,009 Ohm |
Frequency response (DC - 65 kHz) | - 0.4 dB |
Input level for rated output | 1 V RMS |
Max. peak current | > 150 A |
THD(measured at 1 kHzhalf power,8W) | < 0,001 % |
THD (measured at 1 kHz -1 dB, 8 W) | < 0,0015 % |
Noise (measured with bothinputsshorted) |
400 Hz - 30 kHz : 150 µV DC - 30 kHz : 200 µV |
Damping factor (20 Hz - 20 kHz) | > 850 |
Rated output power | |
8 ohms | 600 W |
4 ohms | 1200 W |
Power consumption (no load or signal) | 230 W |
The NEMO is DC coupled from input to output | |
Dimensions | |
Width | 465 mm / 18.3 inches |
Depth | 450 mm / 17.7 inches |
Height | 288 mm / 11.3 inches |
Weight | 41 kg. / 90.2 lbs. |
Related products
Tivoli Audio Model One Radio
- $219.00
Tivoli Audio Model One BT Radio
- $249.00
- $279.00
Isotek Polaris 6 Outlet Power Filter Board
- $629.00
- $699.00